Untitled Document


Press

 

 

      Press & News

 





INTEGRA ANNOUNCES LATEST ADDITIONS TO 2017 LINEUP WITH ‘DRX-3.1’ & ‘DRX 2.1’ 7.2-CHANNEL NETWORK AV RECEIVERS
05/16/17 -

UPPER SADDLE RIVER, NJ, May 16, 2017 – Integra today announced two new 7.2-Channel network AV receivers designed for the professional custom installer: DRX-3.1 (MSRP $1,000 USD & $1,400 CAD) and the DRX-2.1 (MSRP $800 USD & $1,100 CAD). Both models offer a wealth of next-generation functionality and provide the ultimate solution for all advanced home entertainment installations.



A quick run-through of both models hints at the superior design and ultimate performance befitting the Integra heritage as all rear inputs are HDCP-2.2 and HDMI-2.0a and support 4K/60 Hz, Dolby Vision™, HLG (Hybrid Log Gamma), HDR10, WCG (Wide Color Gamut), and BT.2020 Pass-through with HDCP 2.2.



On the audio side, both models can handle Hi-Res audio such as DSD 5.6 MHz / 2.8 MHz and 192 / 24 PCM, and decodes DSD*1, Dolby TrueHD®*2, FLAC, WAV, ALAC, AIFF, WMA Lossless, MP3 and AAC via network and USB input.



What’s more, Integra has now included Google Chromecast built-in*3 that allows owners to cast music from their smart phone or tablet through their Integra AV receiver, as well as control multiple functions via voice control when a Google Home speaker resides on the network.



Additionally, both models feature FireConnect™*4 by Blackfire that takes an analog audio signal from any source component plugged into your Integra AVR, as well as content from Internet radio and send it into multiple zones either wirelessly or hardwired. In that same vein, the DRX-3.1 and the DRX-2.1 support Apple Airplay®, as well as DTS Play-Fi® which will be available via a firmware update. Integra has also added additional music streaming support*5 by adding Tidal and Deezer to a feature-set that also includes Pandora, Spotify, and TuneIn Radio.



The DRX-3.1 outputs 100W per channel at 8 ohms while the DRX-2.1 check in at 80W per channel at 8 ohms, and both units feature 4 ohm-capable, low-impedance amplification system for dynamic and powerful performance. Both models support Dolby Atmos® and DTS:X™ formats up to 5.2.2 channels in addition to traditional 7.2 channel setups.



As always, Integra provides the key features that custom installers seek including


• Bi-directional RS232 and Ethernet control port for home automation;


• Zone 2 pre / line out for distributed audio playback in another room;


• Zone 2 DAC for S/PDIF, NET and analog sources (SPDIF for DRX-3.1 only);


• Independent Zone 2 bass, treble, and balance control;


• Dealer settings memory store and recall with lock / unlock and PC software support;


• 2 IR inputs and 1 output;


• 3 programmable 12V triggers (100 mA, 25 mA x2, with adjustable delay).



A detailed list of features, specifications and owner’s manual can be found at www.integrahometheater.com.





*1 DSD not supported over wireless LAN.


*2 DolbyTrueHD playback via USB input only.


*3 Requires available firmware update.


*4 Sampling rates of 44.1 kHz and 48 kHz are supported. Sharing audio from external analog inputs is enabled with a future firmware update.


*5 Availability of services may vary with region. Please confirm before purchase. Subscription may also be required.



Android, Chromebook, Google Home, Chrome, and Chromecast built-in are trademarks of Google Inc.


iPad, iPhone, iPod touch, and Mac are registered trademarks of Apple Inc., registered in the U.S. and other countries.


FireConnect™ is a technology based on Blackfi re provided by Blackfi re Research Corp., USA.


All other trademarks and registered trademarks are the property of their respective holders.

[return to press releases]

 Home | Dealers | Support | Warranty | Site Map         252 1